php interview questions

Top php frequently asked interview questions

When to use self over $this?

In PHP 5, what is the difference between using self and $this?

When is each appropriate?

Source: (StackOverflow)

UTF-8 all the way through

I'm setting up a new server, and want to support UTF-8 fully in my web application. I have tried in the past on existing servers and always seem to end up having to fall back to ISO-8859-1.

Where exactly do I need to set the encoding/charsets? I'm aware that I need to configure Apache, MySQL and PHP to do this - is there some standard checklist I can follow, or perhaps troubleshoot where the mismatches occur?

This is for a new Linux server, running MySQL 5, PHP 5 and Apache 2.

Source: (StackOverflow)

Why shouldn't I use mysql_* functions in PHP?

What are the technical reasons why I shouldn't use mysql_* functions? (e.g. mysql_query(), mysql_connect() or mysql_real_escape_string())?

Why should I use something else even if they work on my site?

Source: (StackOverflow)

How to get the client IP address in PHP?

How can I get the client IP address using PHP?

I want to keep record of the user who logged into my website through his/her IP address.

Source: (StackOverflow)

Reference - What does this error mean in PHP?

What is this?

This is a number of answers about warnings, errors and notices you might encounter while programming PHP and have no clue how to fix. This is also a Community Wiki, so everyone is invited to participate in adding to and maintaining this list.

Why is this?

Questions like "Headers already sent" or "Calling a member of a non-object" pop up frequently on Stack Overflow. The root cause of those questions is always the same. So the answers to those questions typically repeat them and then show the OP which line to change in his/her particular case. These answers do not add any value to the site because they only apply to the OP's particular code. Other users having the same error can not easily read the solution out of it because they are too localized. That is sad, because once you understood the root cause, fixing the error is trivial. Hence, this list tries to explain the solution in a general way to apply.

What should I do here?

If your question has been marked as a duplicate of this, please find your error message below and apply the fix to your code. The answers usually contain further links to investigate in case it shouldn't be clear from the general answer alone.

If you want to contribute, please add your "favorite" error message, warning or notice, one per answer, a short description what it means (even if it is only highlighting terms to their manual page), a possible solution or debugging approach and a listing of existing Q&A that are of value. Also, feel free to improve any existing answers.

The List

Also see

Source: (StackOverflow)

What is stdClass in PHP?

Please define what stdClass is.

Source: (StackOverflow)

How do I expire a PHP session after 30 minutes?

I need to keep a session alive for 30 minutes and then destroy it.

Source: (StackOverflow)

When should I use require_once vs include?


  • When should I use require vs. include?
  • When should I use require_once vs. require?

Source: (StackOverflow)

How to fix "Headers already sent" error in PHP

When running my script, I am getting several errors like this:

Warning: Cannot modify header information - headers already sent by (output started at /some/file.php:12) in /some/file.php on line 23

The lines mentioned in the error messages contain header() and setcookie() calls.

What could be the reason for this? And how to fix it?

Source: (StackOverflow)

How does 'foreach' actually work?

Let me prefix this by saying that I know what foreach is, does and how to use it. This question concerns how it works under the bonnet, and I don't want any answers along the lines of "this is how you loop an array with foreach".

For a long time I assumed that foreach worked with the array itself. Then I found many references to the fact that it works with a copy of the array, and I have since assumed this to be the end of the story. But I recently got into a discussion on the matter, and after a little experimentation found that this was not in fact 100% true.

Let me show what I mean. For the following test cases, we will be working with the following array:

$array = array(1, 2, 3, 4, 5);

Test case 1:

foreach ($array as $item) {
  echo "$item\n";
  $array[] = $item;

/* Output in loop:    1 2 3 4 5
   $array after loop: 1 2 3 4 5 1 2 3 4 5 */

This clearly shows that we are not working directly with the source array - otherwise the loop would continue forever, since we are constantly pushing items onto the array during the loop. But just to be sure this is the case:

Test case 2:

foreach ($array as $key => $item) {
  $array[$key + 1] = $item + 2;
  echo "$item\n";


/* Output in loop:    1 2 3 4 5
   $array after loop: 1 3 4 5 6 7 */

This backs up our initial conclusion, we are working with a copy of the source array during the loop, otherwise we would see the modified values during the loop. But...

If we look in the manual, we find this statement:

When foreach first starts executing, the internal array pointer is automatically reset to the first element of the array.

Right... this seems to suggest that foreach relies on the array pointer of the source array. But we've just proved that we're not working with the source array, right? Well, not entirely.

Test case 3:

// Move the array pointer on one to make sure it doesn't affect the loop

foreach ($array as $item) {
  echo "$item\n";


/* Output
  array(4) {

So, despite the fact that we are not working directly with the source array, we are working directly with the source array pointer - the fact that the pointer is at the end of the array at the end of the loop shows this. Except this can't be true - if it was, then test case 1 would loop forever.

The PHP manual also states:

As foreach relies on the internal array pointer changing it within the loop may lead to unexpected behavior.

Well, let's find out what that "unexpected behavior" is (technically, any behavior is unexpected since I no longer know what to expect).

Test case 4:

foreach ($array as $key => $item) {
  echo "$item\n";

/* Output: 1 2 3 4 5 */

Test case 5:

foreach ($array as $key => $item) {
  echo "$item\n";

/* Output: 1 2 3 4 5 */

...nothing that unexpected there, in fact it seems to support the "copy of source" theory.

The Question

What is going on here? My C-fu is not good enough for me to able to extract a proper conclusion simply by looking at the PHP source code, I would appreciate it if someone could translate it into English for me.

It seems to me that foreach works with a copy of the array, but sets the array pointer of the source array to the end of the array after the loop.

  • Is this correct and the whole story?
  • If not, what is it really doing?
  • Is there any situation where using functions that adjust the array pointer (each(), reset() et al.) during a foreach could affect the outcome of the loop?

Source: (StackOverflow)

Delete an element from an array

Is there an easy way to delete an element from a PHP array, such that foreach ($array) no longer includes that element?

I thought that setting it to null would do it, but apparently not.

Source: (StackOverflow)

How do I get a YouTube video thumbnail from the YouTube API?

If I have a YouTube video URL, is there any way to use PHP and cURL to get the associated thumbnail from the YouTube API?

Source: (StackOverflow)

PHP detecting request type (GET, POST, PUT or DELETE)

How can I detect which request type was used(GET, POST, PUT or DELETE) in php?

Source: (StackOverflow)

Sort Multi-dimensional Array by Value [duplicate]

Possible Duplicate:
How do I Sort a Multidimensional Array in PHP

How can I sort this array by the value of the "order" key? Even though the values are currently sequential, they will not always be.

    [0] => Array
            [hashtag] => a7e87329b5eab8578f4f1098a152d6f4
            [title] => Flower
            [order] => 3

    [1] => Array
            [hashtag] => b24ce0cd392a5b0b8dedc66c25213594
            [title] => Free
            [order] => 2

    [2] => Array
            [hashtag] => e7d31fc0602fb2ede144d18cdffd816b
            [title] => Ready
            [order] => 1

Source: (StackOverflow)

I never really understood: what is CGI?

CGI is a Common Gateway Interface. As the name says, it is a "common" gateway interface for everything. It is so trivial and naive from the name. I feel that I understood this and I felt this every time I encountered this word. But frankly, I didn't. I'm still confused.

I am a PHP programmer. I did lot of web development.

user (client) request for page ---> webserver(->embedded PHP interpreter) ----> Server side(PHP) Script ---> MySQL Server.

Now say my PHP Script can fetch results from MySQL Server && MATLAB Server && Some other server.

So, now PHP Script is the CGI? because its interface for the between webserver & All other servers? I don't know. Sometimes they call CGI, a technology & othertimes they call CGI a program or someother server.

  • What exactly is CGI?

  • Whats the big deal with /cgi-bin/*.cgi? What's up with this? I don't know what is this cgi-bin directory on the server for. I don't know why they have *.cgi extensions.

  • Why does Perl always comes in the way. CGI & Perl (language). I also don't know what's up with these two. Almost all the time I keep hearing these two in combination "CGI & Perl". This book is another great example CGI Programming with Perl. Why not "CGI Programming with PHP/JSP/ASP"? I never saw such things.

  • CGI Programming in C, confuses me a lot. "in C"?? Seriously?? I don't know what to say. I'm just confused. "in C"?? This changes everything. Program needs to be compiled and executed. This entirely changes my view of web programming. When do I compile? How does the program gets executed (because it will be a machine code, so it must execute as a independent process). How does it communicate with the web server? IPC? and interfacing with all the servers (in my example MATLAB & MySQL) using socket programming? I'm lost!!

  • They say that CGI is depreciated. Its no more in use. Is it so? What is its latest update?

Once, I ran into a situation where I had to give HTTP PUT request access to web server (Apache HTTPD). Its a long back. So, as far as I remember this is what I did:

  1. Edited the configuration file of Apache HTTPD to tell webserver to pass all HTTP PUT requests to some put.php ( I had to write this PHP script)

  2. Implement put.php to handle the request (save the file to the location mentioned)

People said that I wrote a CGI Script. Seriously, I didn't have a clue what they were talking about.

  • Did I really write CGI Script?

I hope you understood what my confusion is. (Because I myself don't know where I'm confused). I request you guys to keep your answer as simple as possible. I really can't understand any fancy technical terminology. At least not in this case.


I found this amazing tutorial "CGI Programming Is Simple!" - CGI Tutorial, which explains the concepts in simplest possible way. After reading this article you may want to read Getting Started with CGI Programming in C to supplement your understanding with actual code samples. I've also added these links to this tutorial to Wikipedia's article : http://en.wikipedia.org/wiki/Common_Gateway_Interface

Source: (StackOverflow)